How to determine if you need to replace shingles in Edmonton
After installing your new roof, you’ll need to be checking your investment regularly to make sure that the shingles are working, protective as well as to look their very best. To assist you to do this, we have a quick and simple checklist to help you determine if you need to replace shingles in Edmonton.
1. Clawing or Curling Shingles
Clawing or curling shingles indicates both aging roof system as well as excessive heat. Clawing or curling shingles are highly disposed to wind uplift and ice destruction. Shingles will turn rigid and may break easily with the loss of tab edges.
2. Missing Granules with Open Spots
Badly placed downspouts, insufficient eavestrough, or unprofessionally designed drainage for the valley on a second story may lead to a waterfall effect that shower off granules over time. Aging of a roof system or physical devaluation may also lead to bare spots as well as a loss of granules.
As soon as the protective granules of a shingle are wasted the shingle becomes harder due to the exposure of heat and sun. Loss of granule on a roof system will enhance aging as well as shingle decay and may become water entry point. This is a sign that you may need to replace your shingles in Edmonton.
3. Missing or Broken Shingles
Broken and missing singles extremely weaken a roof system’s capability to shed water and may become a water entry point. Two main reasons for destroyed shingles are too much of the wind as well as physical damage.
4. Buckling Shingles
Buckling shingles are visible waved distortions that often run vertically up a roof slope. Buckled shingles are greatly affected by wind and ice destruction and may easily be torn off. The entire roof age and wet or badly fixed underlay are usual reasons for buckling shingles.
5. Damaged Flashings
Flashings found around skylights, stacks, eaves, valleys, rakes, wall details, and chimneys are all based on isolation, lifting, and the caulking dried out. The flashing information may lift and isolate as a result of general expansion as well as contraction. Expansion and contraction will lead fasteners to turn to loose and the bottom-flashing flange to lift thereby enabling water to pass
If you discover any of the symptoms illustrated above you may have to replace shingles in Edmonton. It is best to call on a professional to assist you in checking it out before the situation worsens.