There is no doubt that roof repair requires some special skills. But, there are few things which you can do easily on your own. But then again, if you want to do your own roof, then you must know the basics of roofing. All you need to do is to get proper tools, material for repair as well as proper guidance from an expert. Most of the roofing materials are designed to be long lasting. So, if you do your own roof, you can save a lot of money.
If you are interested in installing asphalt roof shingles. Then, you have come to the right place. This is because, here we are going to focus on the installation of this rood type. The same method will be used for this type of roof repair.
Step 1: Work safely:
First thing which you need to keep in mind is about your safety. You must try to get used to it. You are required to maintain a secured footing of 2 x 4 lumber. It is approximately four or five feet in length. In addition to that, you should use 2 x 4 size cleat which will be helpful in protecting you from sliding. Be alert to the danger signs.
Step 2: Uninstall damaged roof shingles:
With the help of a utility knife as well as a hammer claw, you can easily remove the damaged roof shingles. Don’t forget to remove the nails from the roof. If you want to install a new roof, you must get a new roofing paper as well.
Step 3: Installing procedure:
In this step, you will start installing your roof shingle from the lowest section. At first, spread the roofing sheet on the whole roof and shingle it with the help of nails. You should match the size and color of the shingles. In order to install a roof shingle, you need to have an area of 100 square feet. Install the new roof with the help of nails. You have to install them in such a way that each shingle is attached to its next slot. Make sure that all courses are running parallel.
Step 5: Ridges, Hips and Valleys:
If you are willing to shingle a ridge or a hip, all you need to do is to cut these shingles into 3 different tabs. Take care of the alignment and then overlap these tabs so that they can easily straddle the hip. Now put nails on each sides to make it durable. The same procedure will be done for ridges.